Furnace for Melting Metal Waste Products

The melting furnace has been designed for Melting small size lump scrap nonferrous metals and waste metal shavings covered with oil or grinding slurry without preliminary cleaning. The product of melting, depending on initial raw material, can be either a branded metal, or an ingot for a further processing.

Melting is carried out in a layer of liquid synthetic slag blown with high-temperature gaseous products of fuel combustion.

Furnace is designed to meet the high production demands of industry. it is made of heavy gauge welded steel with rugged cast iron legs and top rims.

Furnace is designed for melting lead, babbitt, tin, zinc, type metal, scrap and all other low or medium-fusion metals and alloys.
Furnace comes equipped with powerful burner. Heavy insulation assures fast melting and recovery rate.
Furnace can be operated on either natural (NAT) or liquid propane (LP) gas.

Furnace is equipped with Automatic Digital Temperature Controller, Cast Iron Pot, Thermocouple with Stainless Steel Protection Tube & Bracket, Combo Gas Solenoid & Safety Valve & Auxiliary Pilot.

HIGH QUALITY PRODUCTS

The excellent insulation of our furnaces is ensured by seven inches of insulated brick. This high quality insulation allows a better heat and energy distribution, which improves the crucible life expectancy.

Our furnace comes with a digital indicating controller allowing to reach and maintain a precise temperature.

Our melting furnaces are designed for an intensive and continuous use. They offer very good melting capacity and low operating costs.

EASE OF OPERATION

Our melting furnace is easy to install. At delivery, the control system is already in place. With no special foundation required, our furnace is operational in a couple of hours. Furthermore, the crucible can be replaced easily.

FEATURES

Excellent brick insulation
Uniform heating for an extended life of the crucible
Digital indicating controller
Easy to install
Easy to manipulate
Easy replacement of the crucible
Swing top cover with lateral displacement

Applications:
Lead melting Sand casting Spin casting Die casting Permanent mold casting Precision casting	Art casting Tin melting Solder melting Babbitt melting Pewter melting Zinc melting

FURNACE MAIN COMPONENTS

• Cast Iron Pot
• Furnace Stand
• Combo Gas Solenoid and Safety Valve
• Auxilary Pilot Burner
• Flame Sensor
• Main Pilot Burner
• Automatic Digital Temperature Controller
• Thermocouple with Protection Tube and Mounting Bracket

Technical Specifications:

Brass Melting Capacity	250	kg
Maximum melting temp.	1000	C degree
Melting rate	125	kg/hr
Power consumption	60	KW
Overall Width	1250	mm
Overall Depth	1250	mm
Overall Height	1300	mm
Pot InsideDiametre	400	mm
Pot Inside Depth	250	mm
No. of Burners	6	No.
Gas Connection Pipe Size	1	Inches
Gas Input	156,000	BTU/hr.
Approx.Shipping Weight	180	kg