-
Rose engine body is made from
steel sheets and sections which enables reliable and
continuous operation.
-
The work piece is fixed on
headstock which rotates at high speed for turning operations
( Lath ) and rotates at very low speed fro indexing .
-
Tailstock has a rotating
spindle which holds a cutting edge used for face ornaments .
-
Long work pieces could be
operated by holding it by tail stock .
-
Tool carriage is traveling
along the engine bed to generate the profile of desired
shape
-
Carriage motion is controlled
automatically by means of set of cams which are easy
changeable for different profiles
-
Cams are cut out from a piece
of sheet metal or hard wood with 10 mm thickness and
cam profiles are obtained from desired cross section,
longitudinal section, face ornaments ............etc.
-
Cams are used mainly to
produce bodies (3d profiles) ,while rose engine could be
used without cams to produce circular face ornaments and it
is controlled manually .
-
Rose engine is controlled
through a sophisticated gear box which is operated by
electric motor 220 V and 2 KW.
-
A work piece with 40 cm length
by 40 cm diameter cold be produced.
-
Overall dimensions is 80 cm
length by 40 cm width and 65 cm height.
-
Rose engine weight is
155 kg.